About Poor Movement From a Metal Garage Door
Do you struggle to open and close your metal garage door each time it is used? If you are now ready to get rid of the problematic door altogether, you might want to hold off. You are experiencing the type of problem that might only need a simple repair to be resolved. Find out in this article about the type of problems that can lead to a garage door not opening and closing in a smooth manner.
New Tracks Are Needed
Tracks are very important in the operation of a garage door. Basically, the tracks are in place because they assist with helping the door glide up and down in an orderly manner. When a garage door has been regularly used for numerous years, it places a large amount of wear on the tracks. The tracks may have become excessively rusty, which means that they likely need to be replaced. However, the tracks can also be misaligned and simply need to be adjusted.
The Torsion Springs Are Damaged
Torsion springs are at the top area of a garage door, and they play a major role in how smooth movement will be. The springs are also dangerous when they are in bad shape. For instance, if the springs are unraveling, they can snap at a high amount of force when you least expect it and cause an injury. Torsion springs must be tightly coiled in order to support the garage door as it is being opened and closed. Loose springs lead to the door moving too fast, while rusty springs can lead to slow movement.
Too Many Dents Are in the Door
With metal garage doors, dents are one of the things that can cause problems with opening and closing. The severity of the dents will determine if repairs can be made to resolve the problem. For example, if there are simple a few small dents that are making the door struggle while moving on the tracks, they can likely be removed. Large dents may not be able to be removed, so you will have to replace the door altogether.
You Need to Get the Motor Fixed
Your garage door must have a good motor in order for it to move up and down as it should. Being that you are still able to open and close the door, the motor has likely become weak. If the motor is going out, a contractor can simply replace it.
For more information, contact a business such as Edison Overhead Door.